Texi Iris 10 User Manual

Texi Iris 10 Operation Manual
32
Profile user interface
Needle replacement
In case of needle bending or needle point breakage,please replace with a new one using the attached screwdriver.
·Shut down embroidery machine to prevent bodily injury
caused by accidental starting of the machine.
Shut down power supply for embroidery machine before
needle change.
· Loosen the needle positioning screw and remove
the needle. Grab the needle with your left hand and
the screwdriver with right one, rotate needle positio-
ning screw counterclockwise and after loosening pull
out needle with your left hand.
No. Icon Description
1 User limit setting
2 IP setting
3 Letter library
4 Software information
5 Origin operation
6 Unlock user limitation
7 Display colour settings
8 Power-on automatic reset-
ting
9 Language setting
10 Machine testing

Texi Iris 10 Specifications

General

Brand	Texi
Model	Iris 10
Category	Sewing Machine
Language	English