Texi Iris 10 Operation Manual
4
Turn machine off before: replacing needle, threading, installing attachments, changing the bobbin or bobbin
case.
If you notice any abnormalities in the machine’s function, turn it off immediately and inform a mechanic or your superior.
After finishing work, turn the embroidery machine off and remove the plug from the electric socket. In case of power grid failure,
disconnect the machine from the power grid.
This embroidery machine is not a toy!
We hope that you will use this machine with pleasure for a long time.
USER’S MANUAL
Attention!
The machine is not to be used for other materials than those for which it has been designed.
Non-observance of this rule places the user at risk and can cause irreversible damage to the machine.
Before use, the user should become acquainted with this instruction manual, general safety precautions and maintenance
instructions.
1. Before starting work
1. After turning-on the machine and during its operation, do not touch the needle or other moving parts of the
machine.
2. During embroidering do not put fingers into the needle guard.
3. Before uninstalling hoops, guards or exchanging any other parts, turn power off.
4. Turn machine off before leaving it unattended.
5. Do not allow hair, loose clothing, fingers or any objects to be in the vicinity of the pulley during machine run.
6. Do not clean the machine with paint thinner.
To Next Page
Loading...
Need help?
General
