Thermal Dynamics A40i User Manual

A40i, A60i
Manual 0-5466 PARTS LIST
6-1
SECTION 6:
PARTS LISTS
6.01 Introduction
A. Parts List Breakdown
The parts list provide a breakdown of all replaceable components. The parts lists are arranged as follows:
6.03 Power Supply Replacement
6.04 Replacement Power Supply Parts
6.05 Options and Accessories
6.06 Replacement Parts for SL100SLV Torch with Solenoid on Tube
6.07 Replacement Parts - for Machine Torches with Unshielded Leads
6.08 Torch Consumable Parts Automation / Machine (SL100)Torch
NOTE
Parts listed without item numbers are not shown, but may be ordered by the catalog number shown.
B. Returns
If a product must be returned for service, contact your distributor. Materials returned without proper authorization
will not be accepted.
6.02 Ordering Information
Order replacement parts by catalog number and complete description of the part or assembly, as listed in the parts
list for each type item. Also include the model and serial number of the power supply. Address all inquiries to
your authorized distributor.
6.03 Power Supply Replacement
The following items are included with the replacement power supply: work cable & clamp, input power cable, gas
pressure regulator / filter, and operating manual.
Qty Description Catalog #
1 A40i Power Supply
208-480V, Single Phase 3-5634-1
1 A40i Power Supply
208-480V Three Phase 3-5634-2
1 A40i Power Supply
400V Three Phase 3-5634-3
1 A40i Power Supply
400V, Three Phase, CE, 3-5634-4
1 A40i Power Supply
400V, Three Phase, CCC, 3-5634-3C
1 A60i Power Supply
400V Three Phase 3-6634-3
1 A60i Power Supply
400V, Three Phase, CE, 3-6634-4
1 A60i Power Supply
400V, Three Phase, CCC, 3-6634-3C

Thermal Dynamics A40i Specifications

General

Brand	Thermal Dynamics
Model	A40i
Category	Cutter
Language	English