TK 56704-1-OP-EN
39
Figure 35. Prompt Screen
If YES is selected, the display will briefly show the screen below (Figure 36,
p. 39).
Figure 36. Programming Screen
Electric Mode operation will briefly be confirmed. If unit operation is
required, the electric motor will start as shown in Starting The Electric Motor.
Switching from Electric to Diesel
NNoottee:: Units equipped with the Electric Standby option only.
If the Electric to Diesel Autoswitch Enabled feature in Guarded Access is set
YES, the unit will automatically switch to Diesel Mode operation when
standby power is turned off or is no longer available.
If the Electric to Diesel Autoswitch Enabled feature in Guarded Access is set
NO, the prompt screen (Figure 37, p. 40) will appear when standby power is
turned off or is no longer available. Alarm Code 91 Check Electric Ready
Input and Alarm Code 84 Restart Null will both be set.
OOppeerraattiinngg IInnssttrruuccttiioonnss ffoorr PPrreemmiiuumm HHMMII CCoonnttrrooll PPaanneell
To Next Page
Loading...
Need help?
General
