TK 56704-1-OP-EN
61
13 Sensor Calibration Check Manually monitor load temperature.
Report alarm at end of the day.
17 Engine Failed to Crank If unit is shut down repair immediately.
Otherwise, report alarm at end of the
day.
18 High Engine Coolant Temperature If unit is shut down repair immediately.
Otherwise, report alarm at end of the
day.
19 Low Engine Oil Pressure If unit is shut down repair immediately.
Otherwise, report alarm at end of the
day.
20 Engine Failed to Start If unit is shut down repair immediately.
Otherwise, report alarm at end of the
day.
21 Cooling Cycle Check Manually monitor load temperature.
Report alarm at end of the day.
22 Heating Cycle Check Manually monitor load temperature.
Report alarm at end of the day.
23 Cooling Cycle Fault The indicated zone is not longer able to
operate and has been shut down.
24 Heating Cycle Fault The indicated zone is not longer able to
operate and has been shut down.
25 Alternator Check If unit is shut down repair immediately.
Otherwise, report alarm at end of the
day.
26
Check Refrigeration Capacity Manually monitor load temperature.
Report alarm at end of the day.
28
Pretrip or Self Check Abort Report alarm at end of the day.
31 Check Oil Pressure Switch If unit is shut down repair immediately.
Otherwise, report alarm at end of the
day.
32
Refrigeration Capacity Low The indicated zone is not longer able to
operate and has been shut down.
Repair immediately.
33 Check Engine RPM Report alarm at end of the day.
35
Check Run Relay Circuit If unit is shut down repair immediately.
Otherwise, report alarm at end of the
day.
OOppeerraattiinngg IInnssttrruuccttiioonnss ffoorr PPrreemmiiuumm HHMMII CCoonnttrrooll PPaanneell
To Next Page
Loading...
Need help?
General
