Thermo King VM-405 PBBD2 - Heat Shrink Sealed Butt Splice Connectors

TK 56430-18-IP-EN
65
Heat Shrink Sealed Butt Splice Connectors
IImmppoorrttaanntt:: All splice connectors must be sized for the correct gauge wires.
Always follow these procedures when making sealed butt splice connections:
1. Strip both wire ends the same length. 2. Insert both wires all the way into splice.
3. Crimp splice securely using correct crimper tool. 4. Apply heat until glue appears at both ends of crimp.
SSeeccttiioonn 77 -- EElleeccttrriiccaall SSttaannddaarrddss