76
TK 56430-18-IP-EN
Drain hoses must be routed without kinks or sharp bends and
adequately secured to wall with clamps.
Access holes must be sealed both inside and outside with neutral/
alcohol cure silicone sealant.
One-way water valves (kazoos) must be installed securely onto the
end of the drain hose with a band wrap.
Drains that run inside the walls should be installed in a channel so they
can be easily cleaned or replaced if needed.
SSeeccttiioonn 88 -- EEvvaappoorraattoorr DDrraaiinn HHoossee SSttaannddaarrddss
To Next Page
Loading...
