Thinkware X800 - Setting Advanced Driver Assistance Systems (ADAS)

Settings
34
•󳒀 If the continuous impact detection sensitivity is too high, the product will record a video even when a
minor impact caused by the road condition and your driving is detected. This may shorten the memory
card’s life.
•󳒀 If the continuous impact detection sensitivity is too low, the product may not record a video when a minor
accident occurs.
•󳒀 The vehicle battery will not be charged while the vehicle is parked. If you record in parking mode for an
extended period, the vehicle’s battery may be depleted and you may not be able to start the vehicle.
•󳒀 The Off Voltage setting is only available when Battery Protection is set to ON.
•󳒀 If the Off voltage value is too low, the product may consume the battery completely depending on the
conditions like the vehicle type or temperature.
•󳒀 For vehicles using a 12 V battery (most passenger vehicles), set the voltage to 12 V. For vehicles using the
24 V battery (like most trucks and large vehicles), set the voltage to 24 V.
5.3󳒀 Setting Advanced Driver Assistance Systems (ADAS)
On the Live view screen, tap the Home menu ( ) button
>
Settings
>
Road Safety Settings to change the
road safety settings.
Setting option Description
Vehicle Type Select between Sedan/SUV/Truck (Bus).
ADAS Settings Adjust the location of the product according to the guidance on the display.
Initialize ADAS Tap Initialize ADAS to initialize the calibration settings for the ADAS.
LDWS (Lane Departure
Warning)
Select between Low/Mid/High/OFF.
LDWS speed Select between 50km/60km/70km/80km.
FCWS (Forward Collision
Warning)
Select between Low/Mid/High.
Low Speed FCWS Select between Low/Mid/High.
The front vehicle departure
warning
Select between ON/OFF.