29
4. Using Advanced Driver Assistance Systems
(ADAS) (optional)
ADAS supports a lane departure warning system (LDWS), a forward collision warning system (FCWS), an
urban forward collision warning system (uFCWS), and a forward vehicle start alarm (FVSA).
To use ADAS, you must install the external GPS module (to provide vehicle location and operation
information). For more information, refer to "2.3 Installing the external GPS module (optional)" on page 20.
Use the authentic THINKWARE GPS module (optional). If you use another manufacturer's cable or GPS
module, the product may be damaged or result in electrical fire or electrocution due to the voltage
difference.
Identifying the vehicle type
On the Live view screen, tap the Home menu ( ) button
>
Settings
>
Road Safety Settings, and then
select a Vehicle Type among Sedan / SUV / Truck (Bus) under ADAS Features.
Setting the ADAS settings (auto calibration)
To enhance the ADAS feature's accuracy, follow the instructions to set the alignment on the ADAS settings
screen.
1
On the Live view screen, tap the Home menu ( ) button
>
Settings
>
Road Safety Settings, and then
tap View next to ADAS settings under ADAS Features.
2
Adjust the product to align the blue line displayed
on the ADAS settings screen with the center of the
hood and the green line just above the hood. After
positioning the product, drive at 30 km/h for more
than 1 minute to finish the alignment.
When you align the ADAS settings screen, adjust
the product position within 7 cm of the default
installation location (where the camera lens is
located at the center of the front windshield).
You can use ADAS after the initial setup.
To Next Page
Loading...
