3. Wiring
1.
How to wire
3-5
TSC
1-2-2
Connection of FG wire
Production of FG cable example (prepare it by yourself)
Recommended electric wire: 1.25 mm
2
(AWG16)
Connect the FG wire to the GND terminal, and ground it to the earth.
1-2-3
Wiring diagram
Use one machine of TSC (no reset switch)
･
The motor is energized as soon as the emergency stop switch is released.
･
Connecting TDO will open the internal relay K1, and the TDO emergency stop switch is
activated.
･
While TDO is not connected, the internal relay K1 is closed.
･
When connecting TSC to the network unit TNU, do not wire the CN5 pin number
①
(S1).
(Doing so may cause fault.)
FG wire
GND terminal
Control
power
supply
24V
0V
①
S1
②
S2
③
MPO
④
MPI
⑤
24V
⑥
0V
⑦
EMG-
TDO
0V
Motor
power
supply
X
Emergency
stop switch
CN4
CN3
K1
TSC
(M3 cross-recessed pan-head screws)
To Next Page
Loading...