For the groups ‘DrumLoop’ and ‘1shot’, the parameter ‘RstTime’ is disabled (display
‘–’).
For the group ‘TAP’, the parameter ‘Retrig’ is disabled (display ‘–’).
For the group ‘HIT’, the parameters ‘RstTime’ and ‘Retrig’ are disabled (display ‘–’).
When playing with adjustable touch sensitivity, the volume of each pad is controlled
by touch intensity (‘VelCtrl ON’). If you set this parameter to ‘OFF’, the volume of this
pad is fixed via the ‘Volume’ parameter and can not be controlled by touch intensity
during playing.
Using ‘DrumVoc’ you can determine, wether the drum sound should synchronously
be produce when playing a pad. When setting this parameter to ‘OFF’, only the pad
pattern will sound on playing the pad. Set the parameter to ‘ON’ if you want to hear
both pad pattern and drum sound synchronously.
Operation
e-drum module
34
To Next Page
Loading...
Need help?
General