1.
Select the preset song that you want to record a drum track to (see
Ä
‘Playing a song’
on page 45.
2. Press the [REC] button.
ð
The display shows the first unused user song slot, in factory default condition
‘MySng001’
3. If desired, use the [+] / [–] buttons or the jog wheel to select another user song (e.g., to
overwrite an existing song).
4. Press [SAVE/ENTER] to rename.
ð
The first song name character is highlighted and can be changed using the [+] / [–]
buttons or the jog wheel. Press the [Page +] / [PAGE –] buttons to get to the next /
previous digit.
5. Confirm the change with [SAVE/ENTER].
ð
The display briefly shows ‘SAVE OK!’. As soon as the display turns off, the click starts.
The indicator LEDs of the buttons [CLICK] and [REC] are flashing and the display
shows the ‘Part:’.
6. Use the [+] / [–] buttons or the jog wheel to select the track that you want to overwrite
(drum or percussion).
Record via preset songs
Operation
MPS-600
57
To Next Page
Loading...
Need help?
General