Each trigger can be programmed so that when you hit the respective pad not just a single
sound is produced, but a complex pattern or a preset or user song is played. Up to seven pads
can be programmed within a user kit for playing patterns / songs.
1. Press the [KIT] button.
ð
The display shows the numbers and the names of the currently selected drum kit,
e.g. ‘Acoust-1’.
2. Press the [MENU] button.
ð
The display shows the parameter ‘VOICE’.
3. Determine the trigger to which you want to program a specific pattern. Press one of the
pad select keys or simply hit the pad. To select a trigger that is assigned to the edge of a
pad, press the [RIM] button in addition to the pad select key. To select the triggers that
are assigned to the closed hi-hat, press the [HI-HAT CONTROL] button in addition to the
pad select key. The RIDE Bell, Half Open HIHAT, Half Open HIHAT R and SPLASH triggers
can not be selected by keystroke, but only by playing them (see also
Ä
Chapter 10.1
‘Trigger and pads’ on page 85).
ð
The pad select key LED lights up.
4. Press the [PAGE+] button.
ð
The display shows the value ‘Pattern: OFF’.
Pattern function
Operation
MPS-600
31
To Next Page
Loading...
