Parameter, display Description Value range
Kit Link Not supported in current software version.
TapSync Not supported in current software version.
All available parameters can be changed during playback. The changes are effective
immediately.
All preset songs consist of seven tracks in total, the so-called parts (drum part, percussion part,
Part1…5). These parts can be adjusted as described below.
1. Press the [SONG] button.
2.
Select the desired song, see
Ä
‘Playing a song’ on page 45.
3. Press the [MENU] button.
ð
The display shows the ‘SETUP’ menu.
Part settings
Operation
e-drum module
48