In the CARD menu you can program the loop playback and pre-count function. The
drum module supports SMF 0 and 1 (maximum of 32 tracks, up to 1024 pulses /
quarter note). Files bigger than 542 KB are not supported.
You can load MIDI files with a size of up to 32 KB into the drum module. However, only SMF 1 is
supported. A maximum of seven channels of the MIDI file are processed in user songs of the
type ‘1Shot‘ and ‘Loop’. With user songs of ‘TAP’ and ‘HIT’ type, only the first channel is pro‐
cessed. The following table shows the available channels.
1. Insert the SD card with your MIDI files into the SD card slot of the drum module. Press
the [CARD] button.
ð
The indicator LED of the button lights up. The display shows the SD card menu.
2. Select the desired directory using the [+] or [–] buttons or the jog wheel. Use
[SAVE/ENTER] to change between the directory levels. When the display shows the
desired song, press [MENU.]
ð
The display shows ‘LOAD’.
Loading MIDI files from the SD
card
Operation
e-drum module
74
To Next Page
Loading...
Need help?
General