thomann Millenium MPS-600 - Setting Trigger and Song Track Volumes

Press the [PAGE –] button to get to the previous parameter. Press [EXIT] to quit the
menu.
To set the volume for each trigger of a kit, proceed as follows:
1. Use the [+] / [–] buttons or the jog wheel to select the desired drum kit.
2. Press the [MIXER] button to open the MIXER menu.
ð
The display shows the parameter ‘KITVol:’ and the number and current volume of
the selected drum kit.
3. Press the [SAVE/ENTER] button.
ð
The display shows the parameter ‘TrigVol:’ and the current volume of the selected
trigger.
Setting the trigger volume
Operation
MPS-600
41