6.10
Utility menu
In the utility menu, you can adjust various device parameters within five submenus and reset
all values to factory default condition.
1. Press the [UTILITY] button to open the menu.
ð
The display shows ‘TRIGGER’.
2. Use the [Page–/+] buttons to jump between the parameters (see the following chapters).
3. Press the [SAVE/ENTER] button to open the respective submenus.
ð
On submenu level, you can change the settings using the [+] / [–] buttons or the jog
wheel.
4. Press [EXIT] to return to the next higher level. To save and quit the menu press [EXIT].
Operation
e-drum module
64
To Next Page
Loading...
Need help?
General