In Kit menu, you can change the order of the user kits as desired.
1. Press the [KIT] button.
ð
The display shows the number and name of the currently selected drum kit, e.g.
‘Acoust-1’. The current memory slot is indicated in the lower right area of the display
as ‘DATA xxx’.
2. Use the [PAGE +] button to change to the user kit group and select the desired kit with
the [+] / [–] buttons or the jog wheel.
3. Press the [MENU] button.
ð
The display shows the parameter ‘VOICE’.
4. Press the [PAGE +] button twice to enter the EXCHANGE menu.
5. Use the [+] / [–] buttons or the jog wheel to select the desired list position.
6. Confirm the selection with [SAVE/ENTER].
ð
The display briefly shows ‘EXCHANGE OK!’. Then the original kit is displayed.
In Kit menu, you can rename the user kits as desired.
Changing the user kit order
Renaming user kits
Operation
MPS-600
35
To Next Page
Loading...
Need help?
General