1. Press the [KIT] button.
ð
The display shows the number and name of the currently selected drum kit, e.g.
‘Acoust-1’. The current memory slot is indicated in the lower right area of the display
as ‘DATA xxx’.
2. Use the [PAGE +] button to change to the user kit group and select the desired kit with
the [+] / [–] buttons or the jog wheel.
3. Press the [MENU] button.
ð
The display shows the parameter ‘VOICE’.
4. Press the [PAGE +] button three times to enter the RENAME menu.
5. Press the [SAVE/ENTER] button.
ð
The first character of the kit name is highlighted and can be changed using the [+] /
[–] buttons or the jog wheel. Use the [PAGE –] and [Page +] button to move the
cursor to the next or previous position.
6. Confirm the change with [SAVE/ENTER].
ð
The display briefly shows ‘SAVE OK!’. Then the original kit is displayed with the new
name.
Operation
e-drum module
36
To Next Page
Loading...
