For each trigger of the drum kit, you can set the corresponding sound and several sound
parameters.
1. Press the [KIT] button.
ð
The display shows the number and name of the currently selected drum kit, e.g.
‘Acoust-1’.
2. Select the desired drum kit using the [+] / [–] buttons or the jog wheel.
To change from the group of preset kits to the group of self-created drum kits use the
[PAGE+] (jump to ‘MyKit001’) or [PAGE–] (jump to ‘Acoust-1’) buttons.
3. Press the [MENU] button.
ð
The display shows the parameter ‘VOICE’.
4. Press the [SAVE/ENTER] button.
5. Determine the trigger whose settings you want to change within the selected drum kit.
Therefore press one of the pad select keys or simply hit the pad. To select a trigger that is
assigned to the edge of a pad, press the [RIM] button in addition to the pad select key.
To select the trigger of the closed hi-hat, press the [HI-HAT CONTROL] button in addition
to the pad select key. The RIDE Bell, Half Open HIHAT, Half Open HIHAT R and SPLASH
triggers can not be selected by keystroke, but only by playing them (see also
Ä
Chapter 10.1 ‘Trigger and pads’ on page 85).
Modifying a drum kit
Operation
e-drum module
28
To Next Page
Loading...
