6. Press the [SAVE/ENTER] button.
ð
The display shows the confirmation prompt ‘Sure?’.
7. Press [EXIT] to cancel or confirm with [SAVE/ENTER].
ð
If you confirm, the display briefly shows ‘Erase OK!’.
Preset songs can be modified and adapted during playback. These changes remain effective
until another songs is selected or the unit is switched off. You can save modified preset songs
from all menu levels as new user song.
1. Modify the desired settings as described in the respective chapter.
2. Press the [SAVE/ENTER] button.
ð
The display shows ‘Sv>’ and the number and name of the first user song, in factory
default condition ‘MySng001’. The current memory slot is indicated in the lower
right area of the display as ‘DATA xxx’.
3. Press the [SAVE/ENTER] button.
ð
The first song name character is highlighted and can be changed using the [+] / [–]
buttons or the jog wheel. Press the [Page +] / [PAGE –] buttons you get to the next /
previous digit.
Storing songs
Operation
e-drum module
52
To Next Page
Loading...
Need help?
General