4. Determine the trigger whose volume should be adjusted. In order to do this, press one
of the pad select keys or simply hit the pad. To select a trigger that is associated with the
edge of a pad, press the [RIM] button additionally to the pad select key. To select the
trigger of the closed hi-hat, press the [HI-HAT CONTROL] button additionally to the pad
select key. The triggers RIDE Bell, Half Open HIHAT, Half Open HIHAT R and SPLASH can
not be selected by keystroke, but only by playing them (see also
Ä
Chapter 10.1 ‘Trigger
and pads’ on page 85).
ð
The pad select key LED lights up.
5. Use the [+] / [–] buttons or the jog wheel to select the desired volume.
6. Select the next trigger and adjust the volume as described.
7. Conclusively save the settings with [SAVE/ENTER].
Any unsaved changes are discarded when selecting another kit or switching the unit
off.
Operation
e-drum module
42
To Next Page
Loading...
