2. Press the [PLAY/STOP] button to stop and save the recording.
ð
The display shows the first unused user song slot, in factory default condition
‘MySng001’.
3. If desired, use the [+] / [–] buttons or the jog wheel to select another user song (e.g., to
overwrite an existing song).
4. Press [SAVE/ENTER] to rename.
ð
The first song name character is highlighted and can be changed using the [+] / [–]
buttons or the jog wheel. Press the [Page +] / [PAGE –] buttons you get to the next /
previous digit.
5. Confirm the change with [SAVE/ENTER].
ð
The display briefly shows ‘SAVE OK!’. Then the original song is displayed with its new
name.
Operation
e-drum module
56
To Next Page
Loading...
