2. Use the [PAGE –/+] buttons to get to the next or previous parameter (see the following
table).
ð
The parameter setting can be changed with the buttons [+] and [–] or the jog wheel.
3. When all parameters are set, you can directly start the recording by pressing the
[PLAY/STOP] button.
4.
Save the recording as a new user song see
Ä
‘Storing songs’ on page 52.
Parameter, display Description Value range
Part Recording track (Part) Drum, Perc
TimeSig Time signature 1…9/2, 1…9/4, 1…9/8, 1…9/16
Tempo Tempo 30…280
Operation
e-drum module
60
To Next Page
Loading...
