THOMPSON PUMP J1939 - Pump Monitoring and Safety

- 19 -
PUMP MONITORING AND SAFETY
The following menus must be configured prior to the utilization of suction and discharge pressures for
pump monitoring:
Pump Safety Configuration
Inlet Pressure Check (Off, Always, Run)
Low Inlet Pressure Pre Alarm
Low Inlet Pressure Alarm
High Inlet Pressure Pre Alarm
High Inlet Pressure Alarm
Inlet Pressure Delay
Inlet Pressure Hysteresis
Outlet Pressure Check (Off, Always, Run)
Low Outlet Pressure Pre Alarm
Low Outlet Pressure Alarm
High Outlet Pressure Pre Alarm
High Outlet Pressure Alarm
Outlet Pressure Delay
Outlet Pressure Hysteresis
For Display of Inlet and outlet pressures, enter the Module Configuration Menu and turn on
Suction/Discharge