DMS-CTC-20101208-0018 v1.0
10
Getting Started
1.2.5 Buttons
Overview
DECT Pairing/Paging button
If you press the DECT pairing/paging button:
Between 1 and 5 seconds, the Thomson Gateway pages all connected DECT phones.
Longer than 5 seconds, switches to registration mode to allow you to connect your DECT phone(s) to the
integrated DECT base station of the Thomson Gateway.
For more information, see “6.1.1 Connecting a DECT Phone to Your Thomson Gateway” on page 47.
WPS button
The WPS ( ) button allows you to add new wireless clients to your network in a swift and easy way, without
the need to enter any of your wireless settings manually.
For more information, see “5.1 Connecting Your Wireless Client via WPS” on page 40.
Reset button
The Reset button allows you to reset your Thomson Gateway to factory defaults.
For more information, see “11.6 Reset to Factory Defaults” on page 105.
To Next Page
Loading...
