THOMSON TG797n - Telephony Services

DMS-CTC-20101208-0018 v1.0
53
Telephony
6.3 Telephony Services
Introduction
Telephony services add extra functionality to your phone. For example: putting a call on hold, transferring
calls,...
Requirements
Before you can use a service, must both be:
1 Supported by your service provider.
2 Activated on your Thomson Gateway.
Checking if a telephone service is activated/supported
To check which services are supported or activated, proceed as follows:
1 Browse to the Thomson Gateway GUI.
For more information, see “4.1 Thomson Gateway GUI” on page 32.
2 On the Toolbox menu, click Telephony.
3 In the Navigation bar, click Configure.
4 In the Pick a task list, click View Telephony Services.
5 Under Telephony Services, you can see the services that are supported by your provider.
In the Activated column, you can see if this service is also activated on the Thomson Gateway.
6 To (de)activate a service, proceed with “6.3.1 Activating a Telephony Service on your Thomson Gateway”
on page 54.