THOMSON TG797n - Code of Conduct V3

DMS-CTC-20101208-0018 v1.0
62
Saving Energy with Y
our Thomson Gateway
7.1 Code of Conduct v3
Power states
CoC v3 provides rules for the power consumption in:
 Full power state:
This is the normal operation mode of the device, where all functionality is enabled.
 Low power state:
When there is no user traffic on the device, the device should switch to low power mode. This is a state in
which devices are only allowed to use a limited amount of energy to be able to power its components
and respond to user activity.
Example
Take the following example:
 The user switches off his computer at 20:00.
 There are no other devices connected to the Thomson Gateway.
The Thomson Gateway switches to low power mode. This results in a considerable drop in the overall power
consumption of the Thomson Gateway.
No user traffic
User traffic
Time
Power
Consumption
Full power limit
Low power limit
20:00