DMS-CTC-20101208-0018 v1.0
41
The Thomson Gateway Wireless Access Point
Troubleshooting
If you are having trouble connecting your wireless client via WPS, this may be cause by one of the following
reasons:
WPS can not be correctly executed:
Configure your wireless manually. For more information, see “5.2 Connecting Your Wireless Client
without WPS” on page 42.
Your wireless client is out of range:
If possible move your wireless client closer to your Thomson Gateway or use a wireless repeater to
extend the range of your wireless network.
Another device is interfering on the selected wireless channel:
Change the wireless channel of your Thomson Gateway. For more information, see “ Change the
wireless channel” on page 103.
To Next Page
Loading...
