THOMSON TR-069 - Page 78

E-DOC-CTC-20071119-0003 v1.0
72
6| Service Provisionin
g
 Configuring the signalling protocol: if necessary, modify the value of one or more parameters. The
SetParameterValues RPC (message 6 in preceding illustration) contains following name-value pairs in its
ParameterList argument:
 Creating a voice account: the AddObject RPC (message 9 in preceding illustration) contains for the
ObjectName argument the value “InternetGatewayDevice.Services.VoiceService.1.VoiceProfile.1.Line.”.
The AddObjectResponse (message 11 in preceding illustration) contains for the InstanceNumber
argument for example value “1”.
 Configuring the voice account: if necessary, modify the value of one or more parameters. To enable the
Line.1 object instance, following parameters must be modified (a PhyReferenceList value equal to 1
corresponds to the FXS1 port). The data model will not be updated as long as the PhyReferenceList
parameter (i.e. the voice port) is not set. The SetParameterValues RPC (message 12 in preceding
illustration) contains following name-value pairs in its ParameterList argument:
Name Value
InternetGatewayDevice.Services.VoiceService.1.VoiceProfile.1.SIP.ProxyServer <ip_address
>
InternetGatewayDevice.Services.VoiceService.1.VoiceProfile.1.SIP.ProxyServerPort <port>
InternetGatewayDevice.Services.VoiceService.1.VoiceProfile.1.SIP.RegistrarServer <ip_address
>
InternetGatewayDevice.Services.VoiceService.1.VoiceProfile.1.SIP.
RegistrarServerPort
<port>
Name Value
InternetGatewayDevice.Services.VoiceService.1.VoiceProfile.1.Line.1.Enable Enabled
InternetGatewayDevice.Services.VoiceService.1.VoiceProfile.1.Line.1.
PhyReferenceList
1
InternetGatewayDevice.Services.VoiceService.1.VoiceProfile.1.Line.1.SIP.
AuthUserName
<user name>
InternetGatewayDevice.Services.VoiceService.1.VoiceProfile.1.Line.1.SIP.
AuthPassword
<password>
InternetGatewayDevice.Services.VoiceService.1.VoiceProfile.1.Line.1.SIP.URI <my voice
number>
The parameter PhyReferenceList is mandatory. This means that the parameter must be set
before the Line object is internally created.