THOMSON TR-069 - Page 98

E-DOC-CTC-20071119-0003 v1.0
92
6| Service Provisionin
g
 Configuring the client: the SetParameterValues RPC (message 7 in preceding illustration) contains
following name-value pairs in its ParameterList argument:
 Creating a host: the AddObject RPC (message 10 in preceding illustration) contains for the ObjectName
argument the value “InternetGatewayDevice.Services.X_000E50_DynamicDNS.Client.1.Hostname.”.
The AddObjectResponse (message 12 in preceding illustration) contains for the InstanceNumber
argument for example value “1”.
 Configuring the host: the SetParameterValues RPC (message 13 in preceding illustration) contains
following name-value pair in its ParameterList argument:
 Activating the client: the SetParameterValues RPC (message 16 in preceding illustration) contains
following name-value pairs in its ParameterList argument:
Name Value
InternetGatewayDevice.Services.X_000E50_DynamicDNS.Client.1.
Username
<username>
InternetGatewayDevice.Services.X_000E50_DynamicDNS.Client.1.
Password
<password>
InternetGatewayDevice.Services.X_000E50_DynamicDNS.Client.1.
Interface
InternetGatewayDevice.
WANDevice.1.
WANConnectionDevice.1.
WANPPPConnection.1
InternetGatewayDevice.Services.X_000E50_DynamicDNS.Client.1.
Service
InternetGatewayDevice.
Services.
X_000E50_DynamicDNS.
Service.6
Name Value
InternetGatewayDevice.Services.X_000E50_DynamicDNS.Client.1.
Hostname.1.Name
<IPhostname>
The parameter Name is mandatory. This means that the parameter must be set before the
Hostname object is internally created.
Name Value
InternetGatewayDevice.Services.X_000E50_DynamicDNS.Client.1.
Enable
1