THOMSON TSC 800 - V2.2 - Product Revision History

TSC 800 TRANSFER SWITCH CONTROLLER
PM 049 REV 10 08/09/25 Thomson Technology
1
1. INTRODUCTION
1.1. PRODUCT REVISION HISTORY
The following information provides an historical summary of changes made to this product
since the original release.
Software Version
2.2 08/08/01
Enabled Clock Time Save Feature
2.1 06/03/27
Enhanced Phase Balance Features
2.0 04/12/14
New Features (Refer to Section 1.2)
1.7 02/04/01
Revised Transfer Fail Features and functionality
1.6 98/12/15
Added Remote Communication
1.5 N/A
Unreleased version
1.4 98/06/15
Updated Transfer Fail operation
1.3 98/01/19
Updated default under/over frequency setpoints, transfer fail
programmability, minor logic revisions
1.2 97/10/10
Changed Transfer Switch fail timer to 30 seconds
1.1 97/01/30
Upgraded Frequency setting range
1.0 96/06/30
Original version
Operating & Service Manual Version
Rev 10 08/09/25
Changes for Version 2.2 TSC 800 Software. Added Information for
ICS ATS Neutral delay time
Rev 9 06/04/24
Minor manual revisions for Version 2.1 TSC 800 Software
Production Release
Rev 8 06/03/27
Enhanced phase balance features
Rev 7 04/12/16
New Features (Refer to Section 1.2)
Rev 6 02/04/15
Changes for Version 1.7 TSC 800 Software
Rev 5 00/07/31
Added Four Position Test Switch Information
Rev 4 00/03/01
General revisions
Rev 3 99/02/12
Added Multi-tap information.
Rev 2 98/12/01
Added Remote Communication features per version 1.6 TSC 800
Software
Rev 1 98/01/21
General Revisions for upgraded TSC 800 software
Rev 0 97/06/04
Original release
Contact Thomson Technology, to obtain applicable instruction manuals. Soft copy of most
current version is available at www.thomsontechnology.com.