TSC 800 TRANSFER SWITCH CONTROLLER
PM 049 REV 10 08/09/25 Thomson Technology
81
12. REPLACEMENT PARTS
Replacement parts are available for the TSC 800 controller as follows:
TSC 800 Controller Board P/N 002661
TSC 800 115V Selector Plug P/N 002633 (2 required)
TSC 800 230V Selector Plug P/N 002634 (2 required)
TSC 800 Lexan Faceplate P/N 001599 (Standard 5.5”X5.5” Lexan)
TSC 800 Rear Cover P/N 001073
TSC 800 LCD P/N 000559
TSC 800 LCD connector P/N 000264
TSC 800 LCD Gasket P/N 001074
When ordering replacement parts please provide the following information:
1. Transfer Switch Model code (e.g. TS 873AA0200AS)
2. Transfer Switch Serial Number (e.g. W-022345)
The above information can be found on the transfer switch rating plate located on the outside of the
ATS door.
For other parts not listed, please contact Thomson Technology.
NOTE
There are no user serviceable/replaceable components located
on the TSC 800 printed circuit board. If the TSC 800 controller
is deemed to be defective it must be returned to the Thomson
Technology Factory for repair or replacement. Please refer to
Section 13 for further detailed on product return procedures
required.
13. PRODUCT RETURN POLICY
Thomson Technology uses a Return Material Authorization (RMA) process. Please complete the
Return Authorization Request Form (available on our web page) for return of goods, warranty
replacement/repair of defective parts, or credit consideration and fax to the appropriate department.
Returns only: Sales Fax (604) 888-5606
Warranty replacement/Warranty Repair: Service Fax (604) 888-3370.
Upon receipt of your request, Thomson Technology will confirm with a copy of our Order
Acknowledgement via fax advising the RMA number which should be used to tag the defective
controller prior to shipment.
To Next Page
Loading...
Need help?
General
