Thor Motor Coach CLASS A - Murphy Beds

INTERIOR FEATURES AND COMPONENTS
108
9
CUSTOMER CARE | 877.855.2867
Murphy Beds
Several TMC motorhome floor plans are equipped with
space-saving Murphy beds. ese beds simply fold-down from
their up-right and stowed position for comfortable bed-time
use. When more oor space is needed or when prepping the
motorhome for departure, Murphy beds are easily returned to
their up-right and stowed position.
Manual Murphy Bed, lowering the bed:
1. Remove back cushions and place to the side (Fig. 1).
2. Pull up and raise the foot bar, ensuring it locks into its
fully extended position (Fig. 2).
3. Pull down on the release latch located along the upper
right corner of the bed mechanism (Fig. 3).
4. Carefully rotate and lower the bed to its horizontal
position (Figures 4 and 5).
5. Be sure the foot bar is in its fully vertical and locked
position when the bed is in its fully horizontal position.
Manual Murphy Bed
Figure 1 Figure 2
Figure 3
Figure 4 Figure 5
Figure 6
Raising the bed:
1. Li the outer edge of the bed to a near vertical position.
2. Rotate the foot bar down and towards the bottom of
the bed.
3. Continue to push and rotate the bottom of the bed to its
full up-right position, ensuring the latch located along
the right-side and upper edge engages, securing the bed.
4. Replace the back cushions.