THORLABS DCC1645C User Manual

© 2013 Thorlabs GmbH
4 Programming (SDK)
135
Overview on image capture modes
Image
capture
Trigger
Function calls
Allowed flash
modes
Frame rate
Standard
Global
Start
Continuous
Off
is_SetExternalTrigger
(OFF)
is_CaptureVideo()
X
Freely selectable
Software
is_SetExternalTrigger
(SOFTWARE)
is_CaptureVideo()
X
X
Depending on exposure time
and trigger delay
Hardware
is_SetExternalTrigger
(e.g. HI_LO)
is_CaptureVideo()
X
X
Depending on exposure time
and trigger delay
Freerun
sync.
is_SetExternalTrigger
(e.g. HI_LO_SYNC)
is_CaptureVideo()
X
Freely selectable
Single
frame
Off
is_SetExternalTrigger
(OFF)
is_FreezeVideo()
Freely selectable
Software
is_SetExternalTrigger
(SOFTWARE)
is_FreezeVideo()
X
X
Depending on exposure time
and trigger delay
Hardware
is_SetExternalTrigger
(e.g. HI_LO)
is_FreezeVideo()
X
X
Depending on exposure time
and trigger delay
Timeout values for image capture
When you call is_FreezeVideo() or is_CaptureVideo() , the timeout value for the image capture is
determined from the Wait parameter. If no image arrives within this timeout period, a timeout error message is
issued. Under Windows, a dialog box is displayed if you have enabled error reports (see is_SetErrorReport()
). Information on the error cause can be queried using is_CaptureStatus() .
327
177
327
177
327
177
327
177
327
223
327
223
327
223
223 177
326 386

THORLABS DCC1645C Specifications

General

Brand	THORLABS
Model	DCC1645C
Category	Security Camera
Language	English