THORLABS DCC1645C - Is_Setedgeenhancement

© 2013 Thorlabs GmbH426
DCx Cameras
4.5.34 is_SetEdgeEnhancement
USB 2.0
USB 2.0
Syntax
INT is_SetEdgeEnhancement (HIDS hCam, INT nEnable)
Description
Attention
This function is obsolete and should not be used anymore. We recommend to use the is_EdgeEnhancement()
function instead (see also Obsolete functions ).
is_SetEdgeEnhancement() enables a software edge filter. Due to Bayer format color conversion, the original
edges of a color image may easily become blurred. By enabling the digital edge filter, you can optimize edge
representation. This function causes a higher CPU load.
Input parameters
hCam
Camera handle
nEnable
IS_EDGE_EN_DISABLE
Disables the edge filter.
IS_EDGE_EN_STRONG
Enables strong edge enhancement.
IS_EDGE_EN_WEAK
Enables weaker edge enhancement.
IS_GET_EDGE_ENHANCEMENT
Returns the current setting.
Return values
When used together with
IS_GET_EDGE_ENHANCEMENT
Current setting
IS_INVALID_CAMERA_HANDLE
Invalid camera handle
IS_INVALID_PARAMETER
One of the submitted parameters is outside the valid
range or is not supported for this sensor or is not
available in this mode.
IS_NO_SUCCESS
General error message
IS_SUCCESS
Function executed successfully
Related functions
is_SetColorMode()
is_SetColorConverter()
206 379
319
315