THORLABS DCC1645C User Manual

© 2013 Thorlabs GmbH
4 Programming (SDK)
191
4.3.14 is_CopyImageMemLines
USB 2.0
USB 3.0
USB 2.0
USB 3.0
Syntax
INT is_CopyImageMemLines (HIDS hCam, char* pcSource,
INT nID, INT nLines, char* pcDest)
Description
is_CopyImageMemLines() copies the contents of the image memory described by pcSource and nID to the
memory area to whose starting address pcDest points. The function only copies the number of lines indicated by
nLines.
Attention
The allocated memory must be large enough to accommodate the in nLines given number of image lines
considering the image width and format (Bits per Pixel).
Input parameters
hCam
Camera handle
pcSource
Pointer to the image memory
nID
ID of this image memory
nLines
Number of lines to be copied
pcDest
Pointer to the destination memory to copy the image to
Return values
IS_CANT_COMMUNICATE_WITH_DRIVER
Communication with the driver failed because no driver
has been loaded.
IS_CANT_OPEN_DEVICE
An attempt to initialize or select the camera failed (no
camera connected or initialization error).
IS_INVALID_CAMERA_HANDLE
Invalid camera handle
IS_INVALID_MEMORY_POINTER
Invalid pointer or invalid memory ID
IS_INVALID_PARAMETER
One of the submitted parameters is outside the valid
range or is not supported for this sensor or is not
available in this mode.
IS_IO_REQUEST_FAILED
An IO request from the uc480 driver failed. Possibly the
versions of the uc480_api.dll (API) and the driver file
(uc480_usb.sys) do not match.
IS_NO_SUCCESS
General error message
IS_SUCCESS
Function executed successfully
Related functions
is_AllocImageMem()
is_SetAllocatedImageMem()
157
301

THORLABS DCC1645C Specifications

General

Brand	THORLABS
Model	DCC1645C
Category	Security Camera
Language	English