THORLABS DCC1645C User Manual

© 2013 Thorlabs GmbH
4 Programming (SDK)
173
Return values
Only if ulValue = IS_GET_STATUS
Returns the information specified by nInfo
When used with
IS_LAST_CAPTURE_ERROR
Returns the last image capture error. For a list of all possible error
events, see is_GetCaptureErrorInfo() .
IS_BAD_STRUCTURE_SIZE
An internal structure has an incorrect size.
IS_CANT_COMMUNICATE_WITH_DRIVE
R
Communication with the driver failed because no driver has been
loaded.
IS_CANT_OPEN_DEVICE
An attempt to initialize or select the camera failed (no camera
connected or initialization error).
IS_INVALID_CAMERA_TYPE
The camera type defined in the .ini file does not match the current
camera model.
IS_INVALID_EXPOSURE_TIME
This setting is not available for the currently set exposure time.
IS_INVALID_CAMERA_HANDLE
Invalid camera handle
IS_INVALID_PARAMETER
One of the submitted parameters is outside the valid range or is not
supported for this sensor or is not available in this mode.
IS_IO_REQUEST_FAILED
An IO request from the uc480 driver failed. Possibly the versions of the
uc480_api.dll (API) and the driver file (uc480_usb.sys) do not
match.
IS_NO_SUCCESS
General error message
IS_NOT_CALIBRATED
The camera does not contain any calibration data.
IS_NOT_SUPPORTED
The camera model used here does not support this function or setting.
IS_OUT_OF_MEMORY
No memory could be allocated.
IS_SUCCESS
Function executed successfully
IS_TIMED_OUT
A timeout occurred. An image capturing process could not be
terminated within the allowable period.
Related functions
is_GetCameraInfo()
is_GetError()
is_SetErrorReport()
is_SetTriggerCounter()
386
231
239
326
351

THORLABS DCC1645C Specifications

General

Brand	THORLABS
Model	DCC1645C
Category	Security Camera
Language	English