THORLABS DCC1645C - Page 295

© 2013 Thorlabs GmbH
4 Programming (SDK)
293
cbSizeOfParam
Size (in bytes) of the memory area to which pParam
refers.
Return values
IS_INVALID_CAMERA_TYPE
The camera type defined in the .ini file does not match
the current camera model.
IS_NO_SUCCESS
General error message
IS_SUCCESS
Function executed successfully
Related functions
is_CameraStatus()
Example 1
INT nRet = is_ParameterSet(m_hCam, IS_PARAMETERSET_CMD_LOAD_EEPROM, NULL, NULL);
Example 2
// Load parameters from file (open filebox)
INT nRet = is_ParameterSet(m_hCam, IS_PARAMETERSET_CMD_LOAD_FILE, NULL, NULL);
// Load parameters from specified file
nRet = is_ParameterSet(m_hCam, IS_PARAMETERSET_CMD_LOAD_FILE, L"file.ini", NULL);
Example 3
INT nRet = is_ParameterSet(m_hCam, IS_PARAMETERSET_CMD_SAVE_EEPROM, NULL, NULL);
Example 4
// Save parameters to file (open filebox)
INT nRet = is_ParameterSet(m_hCam, IS_PARAMETERSET_CMD_SAVE_FILE, NULL, NULL);
// Save parameters to specified file
nRet = is_ParameterSet(m_hCam, IS_PARAMETERSET_CMD_SAVE_FILE, L"file.ini", NULL);
Example 5
// Get the number of supported parameter sets in the camera EEPROM
UINT nNumber;
INT nRet = is_ParameterSet(m_hCam, IS_PARAMETERSET_CMD_GET_NUMBER_SUPPORTED, (void*)
&nNumber, sizeof(nNumber));
172