© 2013 Thorlabs GmbH304
DCx Cameras
IS_GET_ENABLE_AUTO_SHUTTER
Returns the current auto exposure shutter setting.
Control parameters
pval1: returns the current setting
IS_SET_ENABLE_AUTO_SENSOR_SHUTTER
Enables/disables the sensor's internal auto exposure
shutter function
*1
Control parameters
pval1 = 1 enables control, 0 disables control
IS_GET_ENABLE_AUTO_SENSOR_SHUTTER
Returns the sensor's current auto exposure shutter
setting
*1
Control parameters
pval1: returns the current setting
IS_SET_ENABLE_AUTO_WHITEBALANCE
Enables/disables the auto white balance function.
Control parameters
pval1 = 1 enables control, 0 disables control
IS_GET_ENABLE_AUTO_WHITEBALANCE
Returns the current auto white balance setting.
Control parameters
pval1: returns the current setting
IS_SET_ENABLE_AUTO_SENSOR_WHITEBALANCE
Enables/disables the sensor's internal auto white balance
function
*1
Control parameters
pval1: white balance mode (see is_GetAutoInfo()
):
WB_MODE_DISABLE
WB_MODE_AUTO
WB_MODE_ALL_PULLIN
WB_MODE_INCANDESCENT_LAMP
WB_MODE_FLUORESCENT_DL
WB_MODE_OUTDOOR_CLEAR_SKY
WB_MODE_OUTDOOR_CLOUDY
IS_GET_ENABLE_AUTO_SENSOR_WHITEBALANCE
Returns the sensor's current auto white balance setting
*1
Control parameters
pval1: returns the current setting
IS_SET_ENABLE_AUTO_FRAMERATE
Enables/disables the auto frame rate function.
Control parameters
pval1 = 1 enables control, 0 disables control
IS_GET_ENABLE_AUTO_FRAMERATE
Returns the current auto frame rate setting.
Control parameters
pval1: returns the current setting
IS_SET_ENABLE_AUTO_SENSOR_FRAMERATE
Enables/disables the sensor's internal auto frame rate
function
*1
Control parameters
pval1 = 1 enables control, 0 disables control
IS_GET_ENABLE_AUTO_SENSOR_FRAMERATE
Returns the sensor's current auto frame rate setting
*1
Control parameters
pval1: returns the current setting
Adjusting auto gain control/auto exposure shutter
Sets the setpoint for auto gain control/auto exposure
shutter.
Control parameters
pval1: defines the setpoint (average brightness of the
227
To Next Page
Loading...
