THORLABS DCC1645C User Manual

© 2013 Thorlabs GmbH334
DCx Cameras
hCam
Camera handle
nBlue
Sets the blue channel gain factor (0...100).
IS_IGNORE_PARAMETER
The blue channel gain factor will not be changed.
Return values
When used with
IS_GET_MASTER_GAIN
IS_GET_RED_GAIN
IS_GET_GREEN_GAIN
IS_GET_BLUE_GAIN
Current setting
IS_CANT_COMMUNICATE_WITH_DRIVER
Communication with the driver failed because no driver has been
loaded.
IS_CANT_OPEN_DEVICE
An attempt to initialize or select the camera failed (no camera
connected or initialization error).
IS_INVALID_CAMERA_TYPE
The camera type defined in the .ini file does not match the current
camera model.
IS_INVALID_CAMERA_HANDLE
Invalid camera handle
IS_INVALID_MODE
Camera is in standby mode, function not allowed
IS_INVALID_PARAMETER
One of the submitted parameters is outside the valid range or is not
supported for this sensor or is not available in this mode.
IS_IO_REQUEST_FAILED
An IO request from the uc480 driver failed. Possibly the versions of
the uc480_api.dll (API) and the driver file (uc480_usb.sys) do
not match.
IS_NO_SUCCESS
General error message
IS_NOT_CALIBRATED
The camera does not contain any calibration data.
IS_NOT_SUPPORTED
The camera model used here does not support this function or
setting.
IS_NULL_POINTER
Invalid array
IS_SUCCESS
Function executed successfully
IS_TIMED_OUT
A timeout occurred. An image capturing process could not be
terminated within the allowable period.
Related functions
is_SetHWGainFactor()
is_GetSensorInfo()
is_SetGainBoost()
is_SetAutoParameter()
335
251
331
303

THORLABS DCC1645C Specifications

General

Brand	THORLABS
Model	DCC1645C
Category	Security Camera
Language	English