© 2013 Thorlabs GmbH
4 Programming (SDK)
387
Not enough destination memory allocated or all
destination buffers locked by the application
Release locked destination memory
Allocate more destination memory
Reduce the frame rate so that there is more time
to process the filled destination memory
Internal error during internal processing of the
image
All destination buffers locked by the application
Release locked destination memory
Allocate more destination memory
Reduce the frame rate so that there is more time
to process the filled destination memory
The computer takes too long to process the
images in the uc480 API (e.g. color conversion)
Reduce the frame rate so that there is more time
to process the filled image memory of the driver
Disable resource-intensive API image pre-
processing functions (e.g. edge enhancement,
color correction, choose smaller filter mask for
software color conversion)
The camera has been disconnected or closed
Not enough free bandwidth on the USB bus for
transferring the image
Reduce the pixel clock frequency
Operate fewer cameras simultaneously on a USB
bus
Check the quality of the USB cabling and
components
The selected timeout value is too low for image
capture
Reduce the exposure time
Increase the timeout
The selected data rate of the sensor is too high
Reduce the pixel clock frequency
Reduce the frame rate
Reduce the image size
The camera's frame rate is too high or the
bandwidth on the network is insufficient to
transfer the image
Reduce the frame rate
Increase the value for the receive descriptors in
the network card settings
Return values
Function executed successfully
Related functions
is_ResetCaptureErrorInfo()
is_GetError()
is_CameraStatus()
is_SetErrorReport()
See also:
Troubleshooting
404
239
172
326
499