THORLABS DCC1645C User Manual

© 2013 Thorlabs GmbH436
DCx Cameras
y
0...yMax
Sets the vertical position
0...yMax
| IS_SET_IMAGE_POS_Y_ABS
Applies the absolute position to the memory as well.
0
When returning settings via parameter x (s. above)
Return values
IS_SUCCESS
Function executed successfully
IS_NO_SUCCESS
General error message
IS_INVALID_PARAMETER
One of the submitted parameters is outside the valid
range or is not supported for this sensor or is not
available in this mode.
When used with
IS_GET_IMAGE_POS parameters
Current setting
IS_INVALID_MODE
Camera is in standby mode, function not allowed
Related functions
is_AOI()
is_ImageFormat()
159
267

THORLABS DCC1645C Specifications

General

Brand	THORLABS
Model	DCC1645C
Category	Security Camera
Language	English