EasyManuals Logo

THORLABS DCC1645C User Manual

THORLABS DCC1645C
530 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #457 background imageLoading...
Page #457 background image
© 2013 Thorlabs GmbH
4 Programming (SDK)
455
No
Error
Description
125
IS_INVALID_PARAMETER
One of the submitted parameters is outside the
valid range or is not supported for this sensor or is
not available in this mode.
127
IS_OUT_OF_MEMORY
No memory could be allocated.
129
IS_ACCESS_VIOLATION
An internal error has occured.
139
IS_NO_USB20
The camera is connected to a port which does not
support the USB 2.0 high-speed standard.
Cameras without a memory board cannot be
operated on a USB 1.1 port.
140
IS_CAPTURE_RUNNING
A capturing operation is in progress and must be
terminated before you can start another one.
145
IS_IMAGE_NOT_PRESENT
The requested image is not available in the camera
memory or is no longer valid.
148
IS_TRIGGER_ACTIVATED
The function cannot be used because the camera is
waiting for a trigger signal.
151
IS_CRC_ERROR
A CRC error-correction problem occurred while
reading the settings.
152
IS_NOT_YET_RELEASED
This function has not been enabled yet in this
version.
153
IS_NOT_CALIBRATED
The camera does not contain any calibration data.
154
IS_WAITING_FOR_KERNEL
The system is waiting for the kernel driver to
respond.
155
IS_NOT_SUPPORTED
The camera model used here does not support this
function or setting.
156
IS_TRIGGER_NOT_ACTIVATED
The function is not possible as trigger is disabled.
157
IS_OPERATION_ABORTED
The dialog was canceled without a selection so that
no file could be saved.
158
IS_BAD_STRUCTURE_SIZE
An internal structure has an incorrect size.
159
IS_INVALID_BUFFER_SIZE
The image memory has an inappropriate size to
store the image in the desired format.
160
IS_INVALID_PIXEL_CLOCK
This setting is not available for the currently set
pixel clock frequency.
161
IS_INVALID_EXPOSURE_TIME
This setting is not available for the currently set
exposure time.
162
IS_AUTO_EXPOSURE_RUNNING
This setting cannot be changed while automatic
exposure time control is enabled.
163
IS_CANNOT_CREATE_BB_SURF
The BackBuffer surface cannot be created.
164
IS_CANNOT_CREATE_BB_MIX
The BackBuffer mix surface cannot be created.
165
IS_BB_OVLMEM_NULL
The BackBuffer overlay memory cannot be locked.
166
IS_CANNOT_CREATE_BB_OVL
The BackBuffer overlay memory cannot be created.
167
IS_NOT_SUPP_IN_OVL_SURF_MODE
Not supported in BackBuffer Overlay mode.
168
IS_INVALID_SURFACE
Back buffer surface invalid.
169
IS_SURFACE_LOST
Back buffer surface not found.
170
IS_RELEASE_BB_OVL_DC
Error releasing the overlay device context.
171
IS_BB_TIMER_NOT_CREATED
The back buffer timer could not be created.
172
IS_BB_OVL_NOT_EN
The back buffer overlay was not enabled.
173
IS_ONLY_IN_BB_MODE
Only possible in BackBuffer mode.
174
IS_INVALID_COLOR_FORMAT
Invalid color format
175
IS_INVALID_WB_BINNING_MODE
Mono binning/mono sub-sampling do not support
automatic white balance.

Table of Contents

Other manuals for THORLABS DCC1645C

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the THORLABS DCC1645C and is the answer not in the manual?

THORLABS DCC1645C Specifications

General IconGeneral
BrandTHORLABS
ModelDCC1645C
CategorySecurity Camera
LanguageEnglish

Related product manuals