Commissioning – Run the Tigo Energy Intelligence App
EI Residential Solar Solution US Installation Manual | www.tigoenergy.com | Help Center 59
2. Tap the inverter icon at the bottom of the screen and then
tap a location in the layout grid to place it.
• The numbers below the equipment icons show the
number of devices placed on the grid over the
number detected.
• Once placed, you may drag a device to adjust its
location as needed.
3. Drag the PV module icon to the layout grid to place
multiple modules. Otherwise, tap the icon and then tap
the grid to place them individually.
• Arrange the modules carefully to reflect their actual
layout on a roof or field. Tap a module to change
its portrait/landscape orientation.
To Next Page
Loading...
