3-5
Twist Owner’s Manual
OM_TWIST_0811RevA
CHAPTER 3: FOOTRESTS
Adjusting the Depth
Tools needed:
• 5/32” Allen Wrench
1. Remove the Allen screws and washers that attach the footplate to the rotation brackets. See Figure 3-12.
2. Move the footplate to the desired depth.
3. Reinstall and securely tighten the Allen screws and washers.
Figure 3-12
Adjusting the Depth
Allen
Screw
Washers
Footplate
Rotation
Brackets
Buckle Adjustable Calf Strap
Buckle Adjustable Calf Strap is shown in Figure 3-13. Install the calf strap as shown in Figure 3-13.
Figure 3-13
Buckle Adjustable Calf Strap
To Next Page
Loading...
