TiLite Twist - Chapter 14: Adjustable Seat Width and Depth; Adjusting the Width of the Wheelchair

14-1
Twist Owner’s Manual
OM_TWIST_0811RevA
CHAPTER 14: ADJUSTABLE SEAT WIDTH AND DEPTH
TiLite Twist wheelchairs are designed to be expandable to accommodate the needs of a growing child. This chapter
explains the procedures to follow in order to expand the seat width and/or depth on these chairs. Up to two additional
aluminum backrest release bars may be ordered at no additional charge. Please contact Customer Service for
assistance.
Adjusting the Width of the Wheelchair
TiLite Twist wheelchairs are equipped with frame expansion spacers. These spacers enable you to adjust the width
of the chair within a 3” range.
Tools Needed:
• 3/16” Allen Wrench
• 5/32” Allen Wrench
• 7/16” Open End Wrench
• 3/8” Open End Wrench
• Ruler or measuring tape
1. Remove the rear wheels from the chair.
2. Remove the seat cushion.
3. Remove the back upholstery. See “Velcro
®
-Style Back Upholstery” or “Tension Adjustable by Straps Back
Upholstery” on pages 7-2 and 7-3.
4. Remove the seat sling. See “Tension Adjustable Bolt-On Seat Upholstery – Replacing the Upholstery” on page
7-4 or “Solid Aluminum Seat Pan – Removing/Replacing” on pages 7-4 and 7-5.
5. Remove any side guards or armrests installed on the chair.
6. Place the frame upside down on a level surface as shown in Figure 14-1.
Figure 14-1
Twist frame on level surface