TiLite Twist - User Friendly Flip-Up Anti-Tips

13-2
Twist Owner’s Manual
OM_TWIST_0811RevA
CHAPTER 13: ANTI-TIPS
Figure 13-2
Mounting the Black Aluminum Anti-Tip Receiver
Allen Screw
Camber
Clamp
Receiver
Allen
Screw
Camber Tube
Nylock Nut
Washer
USER FRIENDLY FLIP-UP ANTI-TIPS
Engaging
To engage the anti-tip, grip the anti-tip rmly, pressing down on the release lever, lower the anti-tip until the anti-tip
receiver re-engages in the anti-tip mount in the “down” position shown in Figure 13-3.
Figure 13-3
Engaging the Anti-Tip
Anti-Tip
Mount
Release
Lever
Receiver