TIM MIRUS Controller - Change to Operation Mode; Changing Patient Data

3 Preparation
IFU, MIRUS Controller, en-GB, N.00 25
3.7 Change to operation mode
Press menu button Home.
 Home screen
pre-set MAC value, e.g. SEVO
MAC
40
= 0.5 = 0.9 Vol%
Refer to chapter 8.1 Alarm settings and
application defaults for more information
about ISO and DES.
3.8 Changing patient data
Press menu button Patient data.
Note: Changing patient data is also
possible during VA application.
 Patient data
pre-set:
 gender: male
 age: 40 years
 size: 180 cm
 weight: 80 kg