TIM MIRUS Controller - Changing Wash-In Speed

3 Preparation
28 IFU, MIRUS Controller, en-GB, N.00
3.9 Changing wash-in speed
Press menu button MAC pilot.
Note: Changing wash-in speed is also
possible during VA application.
 MAC pilot
pre-set Wash-in speed:
 rabbit = medium
Further options:
 turtle = slow
 cheetah = fast
Refer to chapter 8.2 Specification of wash-
in speed parameters for further information.
Press button for selected wash-in speed.
 Button for selected wash-in speed is
light grey.
Press Confirm button.
 Change completed.